home

HOME

composite-material

COMPOSITE MATERIAL

downloads

DOWNLOADS

about-us

ABOUT US

contact-us

CONTACT US

certifications

CERTIFICATIONS

gst-itc

GST ITC

payment-options

PAYMENT OPTIONS

return-exchange

RETURN & EXCHANGE

terms-of-service

TERMS OF SERVICE

privacy-policy

PRIVACY POLICY

shipping-policy

SHIPPING POLICY

general

GENERAL

all-products

All Products

drone-kit

Drone Kit

fpv-kit

FPV KIT

drone-motors-bldc

Drone Motors (BLDC)

t-motor

T-MOTOR

emax

EMAX

betafpv

BETAFPV

hglrc

HGLRC

tarot

Tarot

drone-transmitter-and-receiver

Drone Transmitter and Receiver

flysky

Flysky

radiomaster

Radiomaster

frysky

Frysky

radiolink

Radiolink

siyi

SIYI

jumper

Jumper

drone-frame-and-accessories

Drone Frame and Accessories

quadcopter

Quadcopter

hexacopter

Hexacopter

octacopter

Octacopter

flight-controller-accessories

Flight Controller & Accessories

raspberry-pi-accessories

Raspberry Pi & Accessories

gimbal-accessories

Gimbal Accessories

telemetry

Telemetry

gps-and-antennas

GPS and Antennas

simulators

Simulators

connectors

Connectors

arduino-boards

Arduino Boards

3d-printing-filament

3D Printing Filament

electronic-instruments-and-tools

Electronic Instruments and Tools

soldering-tools

Soldering Tools

smart-gadgets

Smart Gadgets

servo-motors

Servo Motors

robotics-accessories

Robotics Accessories

batteries

Batteries

sensors

Sensors

wires-and-cables

Wires and Cables

esc-drone-speed-controller

(ESC) Drone Speed Controller

fpv-esc

FPV ESC

tapes-and-adhesive

Tapes and Adhesive

red-acrylic-polyester-tape

Red Acrylic Polyester Tape

duct-tape

Duct Tape

cross-filament-tape

Cross Filament Tape

masking-tape

Masking Tape

printed-tape

Printed Tape

miscellaneous

Miscellaneous

camera

Camera

propellers

Propellers

0-3-inch

0-3 Inch

9-15

16-22

battery-chargers

Battery Chargers

heat-shrink-tubing-sleeve

Heat Shrink Tubing / Sleeve

pvc-heat-shrink

PVC Heat Shrink

1-mm-to-4-mm

1 mm to 4 mm

5-mm-to-10-mm

5 mm to 10 mm

heat-shrink-combos

Heat Shrink Combos

carbon-fiber-product

Carbon Fiber Product

carbon-fiber-sheet

Carbon Fiber Sheet

carbon-fiber-tube

Carbon Fiber Tube

balsa-sheets

Balsa Sheets

fixed-wing-parts

Fixed Wing Parts

motor-spinner

Motor Spinner

servo-motors-1

video-transmitter-receiver

Video Transmitter & Receiver

fpv-goggles

FPV Goggles

screws-and-nuts

Screws and Nuts

drone-accessories

Drone Accessories

Footer

Terms & Conditions
Please read these Terms and Conditions ("Terms", "Terms and Conditions") carefully before using our webstore operated by our company/entity. ("us", "we", or "our"), or the services provided therein (the “Service”).  These Terms apply to all visitors, users and others who access or use the Service. 
Your access to and use of the Service is conditional upon on your acceptance of and compliance with these Terms.  By accessing or using the Service you agree to be bound by these Terms. If you disagree with any part of the terms, do not access or use the Service. 
We reserve the right to revise these Terms from time to time. Please check these Terms from time to time for any amendments. Your continued use of the Service after these Terms have been amended will be deemed to constitute your acceptance of the amended Terms.


Placing an Order
To place an order through our webstore, click on the product that you wish to purchase and follow the onscreen instructions. Your purchase of the product shall be subject to the terms and conditions contained in our webstore in relation to the product.    
You should take care to ensure that all the information you provide to us is correct. Please check your Order before submitting it to us. If you are placing an Order for a product which is digital content, you must check that the specifications of your computer or device meet the hardware and software requirements.
After you have placed an Order, we will send an email to you acknowledging that we have received your Order. This acknowledgement does not, however, mean that your Order has been accepted by us.
We are not obliged to accept your Order and may at our discretion decline to accept any Order. In the event we decline to accept an Order, we may send an email to you notifying you that we do not accept your Order. This is typically for the following reasons:
a.	the product is not available;
b.	we cannot authorise your payment;
c.	you are not allowed to purchase the Product from us under the applicable law;
d.	we are not allowed to sell the Product to you under the applicable law; or
e.	there has been an error in the pricing or description of the product.


When we accept your Order, we will confirm such acceptance by sending an email to you confirming that we have received your Order and will be preparing to ship the product to your address or, in the case of Products which are digital content, providing you with instructions on how the digital content can be downloaded (“Confirmation Email”). A binding contract in respect of the product ordered will be formed between you and us when the Confirmation Email is sent to you.


Cancellation & Refund
If you change your mind, or the product you received is not what you expected or are otherwise not satisfied with our product, please contact us before returning the item. 
You have [fourteen days] to return an order after receiving it.
If the product or packaging is used or damaged, we reserve the right to deduct any depreciation in value when refunding the product. 
Unless otherwise agreed upon, the refund will be processed through the same payment method you used to make your original purchase.


Shipping & Delivery
Products in stock are normally delivered within the number of working days shown on our website.
We will deliver the Products to the address given in your Order. If no one is at the address at the time of delivery, we will inform you of an alternative time for the delivery or a location where you can collect the Products.
Unless arrangements are made with us, you must cover the cost of the return. We reserve the right to not allow for returns or exchanges to our products. 
Please note that exceptions may apply for the return of certain custom-made, hygienic and other products
You are responsible for any damage incurred by items during the return shipment. We therefore strongly recommend that you send the products well packaged, in good condition and in their original box and/or packaging.
If possible, please provide us with a tracking number for the return shipment.
If a returned item is shipped internationally, mark as “RETURNED GOODS” to avoid any Customs charges. We are not responsible for any charges imposed on packages returned by Customs.
If you have any questions, please contact us.


Disclaimer
The information contained on our webstore is for general information purposes only. We assume no responsibility for errors or omissions in the contents of our webstore or in the course of providing the Service. In no event shall our company be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of our products, our webstore or the Service. 
We reserve the right to make additions, deletions, or modification to the contents on the webstore at any time without prior notice. We do not warrant that the webstore is free of viruses or other harmful components. 
You agree that we do not make any representations or warranties of any kind (implied, express or statutory) including warranties as to merchantability, satisfactory quality or fitness for a particular purpose, in respect of our products and/or the Service.  In addition, we do not make any representations or warranties that any digital content which we supply to you is (i) compatible with any third party software or equipment; or (ii) free of errors or bugs.


Privacy
The security of your Personal Information is important to us, but remember that no method of transmission over the Internet, or method of electronic storage, is 100% secure. While we strive to use commercially acceptable means to protect your Personal Information, we cannot guarantee its absolute security. 
We may use your Personal Information to contact you with newsletters, marketing or promotional materials.


Governing Law and Jurisdiction
These Terms shall be governed by and construed in accordance with the laws of the country which we have our primary place of business in. All disputes arising out of or in connection with these Terms shall be submitted to the exclusive jurisdiction of the Courts of the said country.


Header

This Website is Owned and Operated By - R P SONS DIGITAL ENTERPRISES

    Fully HAT compatible
    40pin GPIO (Unpopulated)
    Stream and watch Hi-definition video output at 1080P
    512MB RAM and Micro SD Slot for OS
    Tiny Current Draw ~ 140mA at 5V!
    Mini-HDMI for Video
    Micro-USB OTG Host for Data and Power
    Micro-CSI Camera Port
    On-Board Bluetooth and WiFi.



Raspberry Pi Zero Wireless WH (Pre-Soldered Header)

2GB/4GB Varients
Quad-Core 64-bit Broadcom 2711, Cortex A72  Processor
WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
Operating Power 5V@3A  via USB Type-C Port

Raspberry Pi 4 Model B with 2 GB RAM

    RAM: 1GB
    Processor: Broadcom BCM2837 chipset 1.2GHz Quad-Core ARM Cortex-A53       (64Bit)
    802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
    Storage : SD/MMC/SDIO
    Power: 5V / 700mA~3A via micro USB


Raspberry Pi 3 – Model B Original with Onboard WiFi and Bluetooth

    BCM2710A1 die Cortex-A53 CPU
    512MB LPDDR2 DRAM
    802.11b/g/n wireless LAN
    Bluetooth 4.2 / Bluetooth Low Energy (BLE)
     MicroSD card slot
     Mini HDMI and USB 2.0 OTG ports
    Micro USB power



Raspberry Pi Zero 2 W

    Quad-Core 64-bit Broadcom 2711, Cortex A72  Processor
    WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
    LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
    Operating Power 5V@3A  via USB Type-C port
    Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p


Raspberry Pi 4 Model-B with 8 GB RAM

    1.Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
    1GB LPDDR2 SDRAM
    2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
    Gigabit Ethernet over USB 2.0 (maximum throughput of 300 Mbps)
    Extended 40-pin GPIO header, Full-size HDMI
    4 USB 2.0 ports
    CSI camera port, DSI display port for connecting a Raspberry Pi touchscreen display
    4-pole stereo output and composite video port


Raspberry Pi 3 Model B+ BCM2837B0 SoC, IoT, PoE Enabled

    Standard: IEEE 802.3at-2003 PoE
    Input voltage: 37–57 V DC, Class 4 device
    Output power: 5 V DC/4 A
    Integrated Fan Control and 25mm x 25mm Brushless Fan
    Plug-and-Play Compatibility with Raspberry Pi 3 B+ and Pi 4



Raspberry PI POE+ Hat for 3B+ and Pi 4

     RP2040 microcontroller chip designed by Raspberry Pi
    Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
    264KB of SRAM, and 2MB of onboard Flash memory
    26 × multi-function GPIO pins
    2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
    Onboard temperature sensor



Raspberry Pi Pico

    1GB/2GB/4GB Variants
    Quad-Core 64-bit Broadcom 2711, Cortex A72  Processor
    WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
    LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
    Operating Power 5V@3A  via USB Type-C port
    Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p


Raspberry Pi 4 Model-B with 4 GB RAM