home

HOME

composite-material

COMPOSITE MATERIAL

downloads

DOWNLOADS

about-us

ABOUT US

contact-us

CONTACT US

certifications

CERTIFICATIONS

gst-itc

GST ITC

payment-options

PAYMENT OPTIONS

return-exchange

RETURN & EXCHANGE

terms-of-service

TERMS OF SERVICE

privacy-policy

PRIVACY POLICY

shipping-policy

SHIPPING POLICY

general

GENERAL

all-products

All Products

drone-kit

Drone Kit

fpv-kit

FPV KIT

drone-motors-bldc

Drone Motors (BLDC)

t-motor

T-MOTOR

emax

EMAX

betafpv

BETAFPV

hglrc

HGLRC

tarot

Tarot

drone-transmitter-and-receiver

Drone Transmitter and Receiver

flysky

Flysky

radiomaster

Radiomaster

frysky

Frysky

radiolink

Radiolink

siyi

SIYI

jumper

Jumper

drone-frame-and-accessories

Drone Frame and Accessories

quadcopter

Quadcopter

hexacopter

Hexacopter

octacopter

Octacopter

flight-controller-accessories

Flight Controller & Accessories

raspberry-pi-accessories

Raspberry Pi & Accessories

gimbal-accessories

Gimbal Accessories

telemetry

Telemetry

gps-and-antennas

GPS and Antennas

simulators

Simulators

connectors

Connectors

arduino-boards

Arduino Boards

3d-printing-filament

3D Printing Filament

electronic-instruments-and-tools

Electronic Instruments and Tools

soldering-tools

Soldering Tools

smart-gadgets

Smart Gadgets

servo-motors

Servo Motors

robotics-accessories

Robotics Accessories

batteries

Batteries

sensors

Sensors

wires-and-cables

Wires and Cables

esc-drone-speed-controller

(ESC) Drone Speed Controller

fpv-esc

FPV ESC

tapes-and-adhesive

Tapes and Adhesive

red-acrylic-polyester-tape

Red Acrylic Polyester Tape

duct-tape

Duct Tape

cross-filament-tape

Cross Filament Tape

masking-tape

Masking Tape

printed-tape

Printed Tape

miscellaneous

Miscellaneous

camera

Camera

propellers

Propellers

0-3-inch

0-3 Inch

9-15

16-22

battery-chargers

Battery Chargers

heat-shrink-tubing-sleeve

Heat Shrink Tubing / Sleeve

pvc-heat-shrink

PVC Heat Shrink

1-mm-to-4-mm

1 mm to 4 mm

5-mm-to-10-mm

5 mm to 10 mm

heat-shrink-combos

Heat Shrink Combos

carbon-fiber-product

Carbon Fiber Product

carbon-fiber-sheet

Carbon Fiber Sheet

carbon-fiber-tube

Carbon Fiber Tube

balsa-sheets

Balsa Sheets

fixed-wing-parts

Fixed Wing Parts

motor-spinner

Motor Spinner

servo-motors-1

video-transmitter-receiver

Video Transmitter & Receiver

fpv-goggles

FPV Goggles

screws-and-nuts

Screws and Nuts

drone-accessories

Drone Accessories

Footer

Terms & Conditions
Please read these Terms and Conditions ("Terms", "Terms and Conditions") carefully before using our webstore operated by our company/entity. ("us", "we", or "our"), or the services provided therein (the “Service”).  These Terms apply to all visitors, users and others who access or use the Service. 
Your access to and use of the Service is conditional upon on your acceptance of and compliance with these Terms.  By accessing or using the Service you agree to be bound by these Terms. If you disagree with any part of the terms, do not access or use the Service. 
We reserve the right to revise these Terms from time to time. Please check these Terms from time to time for any amendments. Your continued use of the Service after these Terms have been amended will be deemed to constitute your acceptance of the amended Terms.


Placing an Order
To place an order through our webstore, click on the product that you wish to purchase and follow the onscreen instructions. Your purchase of the product shall be subject to the terms and conditions contained in our webstore in relation to the product.    
You should take care to ensure that all the information you provide to us is correct. Please check your Order before submitting it to us. If you are placing an Order for a product which is digital content, you must check that the specifications of your computer or device meet the hardware and software requirements.
After you have placed an Order, we will send an email to you acknowledging that we have received your Order. This acknowledgement does not, however, mean that your Order has been accepted by us.
We are not obliged to accept your Order and may at our discretion decline to accept any Order. In the event we decline to accept an Order, we may send an email to you notifying you that we do not accept your Order. This is typically for the following reasons:
a.	the product is not available;
b.	we cannot authorise your payment;
c.	you are not allowed to purchase the Product from us under the applicable law;
d.	we are not allowed to sell the Product to you under the applicable law; or
e.	there has been an error in the pricing or description of the product.


When we accept your Order, we will confirm such acceptance by sending an email to you confirming that we have received your Order and will be preparing to ship the product to your address or, in the case of Products which are digital content, providing you with instructions on how the digital content can be downloaded (“Confirmation Email”). A binding contract in respect of the product ordered will be formed between you and us when the Confirmation Email is sent to you.


Cancellation & Refund
If you change your mind, or the product you received is not what you expected or are otherwise not satisfied with our product, please contact us before returning the item. 
You have [fourteen days] to return an order after receiving it.
If the product or packaging is used or damaged, we reserve the right to deduct any depreciation in value when refunding the product. 
Unless otherwise agreed upon, the refund will be processed through the same payment method you used to make your original purchase.


Shipping & Delivery
Products in stock are normally delivered within the number of working days shown on our website.
We will deliver the Products to the address given in your Order. If no one is at the address at the time of delivery, we will inform you of an alternative time for the delivery or a location where you can collect the Products.
Unless arrangements are made with us, you must cover the cost of the return. We reserve the right to not allow for returns or exchanges to our products. 
Please note that exceptions may apply for the return of certain custom-made, hygienic and other products
You are responsible for any damage incurred by items during the return shipment. We therefore strongly recommend that you send the products well packaged, in good condition and in their original box and/or packaging.
If possible, please provide us with a tracking number for the return shipment.
If a returned item is shipped internationally, mark as “RETURNED GOODS” to avoid any Customs charges. We are not responsible for any charges imposed on packages returned by Customs.
If you have any questions, please contact us.


Disclaimer
The information contained on our webstore is for general information purposes only. We assume no responsibility for errors or omissions in the contents of our webstore or in the course of providing the Service. In no event shall our company be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of our products, our webstore or the Service. 
We reserve the right to make additions, deletions, or modification to the contents on the webstore at any time without prior notice. We do not warrant that the webstore is free of viruses or other harmful components. 
You agree that we do not make any representations or warranties of any kind (implied, express or statutory) including warranties as to merchantability, satisfactory quality or fitness for a particular purpose, in respect of our products and/or the Service.  In addition, we do not make any representations or warranties that any digital content which we supply to you is (i) compatible with any third party software or equipment; or (ii) free of errors or bugs.


Privacy
The security of your Personal Information is important to us, but remember that no method of transmission over the Internet, or method of electronic storage, is 100% secure. While we strive to use commercially acceptable means to protect your Personal Information, we cannot guarantee its absolute security. 
We may use your Personal Information to contact you with newsletters, marketing or promotional materials.


Governing Law and Jurisdiction
These Terms shall be governed by and construed in accordance with the laws of the country which we have our primary place of business in. All disputes arising out of or in connection with these Terms shall be submitted to the exclusive jurisdiction of the Courts of the said country.


Header

This Website is Owned and Operated By - R P SONS DIGITAL ENTERPRISES

No. of Channels: 10
Model Type: Fixed-Wing/Glider/Helicopter
RF Range: 2.4055-2.475GHz
RF Channel: 140
RF Receiver Sensitivity: -105dBm
Bandwidth: 500KHz
2.4GHz System: AFHDS 2A
Modulation Type: GFSK
Oprating Voltage: 4.0-6.5V DC

FlySky FS-IA10B Radio Receiver

Transmitter: FS-i6X (6 Channels)
Receiver: FS-iA10B (10 Channels)
RF Range: 2.408-2.475 GHz
RF Power : 20 dBm
RF Channel: 135
Bandwidth: 500 kHz
Total Weight: 392 gm
Power: 6V DC 1.5A

Flysky FS-i6X 2.4GHz 6CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver

FS-i6S Transmitter: 
No. of Channel: 10
Frequency Range: 2.4055 – 2.475GHz
Band Width: 500KHz
Band Number: 140
Transmitting Power: 20dbm
2.4G Mode:  AFHDS 2A
Modulation System: GFSK
FS-iA10B Receiver:
No. of Channel: 10
Frequency Range: 2.4055 – 2.475GHz
Band Number: 140
Receiver Sensitivity: -105dbm
2.4G Mode:  AFHDS 2A
Modulation System: GFSK

Flysky FS-i6S 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 10CH Receiver

This is brand new FlySky FS-ST8 2.4 GHz ANT Transmitter with FS-SR8 receiver (Upgraded Version) from FLYSKY. But why is it here? Why does it arrive? Well, it is made to fill the gap between Flysky’s budget radios like the FS- I6x  and their premium PL 18. This uses the Flysky brand new A N T  transmitter protocol which is supposed to be an upgrade from the older AFHDS 2A but a bit lower than the premium AFHDS 3. It has 10 channels, which is pretty standard and plenty for quadcopters and even slightly complicated airplanes. And you can even use it to track other ground vehicles with this although.

FlySky FS-ST8 2.4 GHz ANT Transmitter does feature an external module port on the back for Jr-style modules. However, it is only compatible with only FLYSKY modules. So no crossfire or ELRS for you
So, should you invest in this?  Yes, if you want to switch from the older AFHDS 2A to the new A N T transmitter protocol, the FS-ST8 is newer and better, with a lot more capabilities for a little bit more money than the older FS-I6x.

Specifications and Features:
Transmitter:

Brand: FLYSKY
Product Model: FS-ST8
Channels: 8-10
Adaptive Receiver: FS-SR8 ( Adapts Receiver with ANT Protocol )
Model Type: Helicopters, Gliders, Delta-wing Airplanes, Multicopters, Engineering vehicles, Robots, Cars or Boats, etc.
RF: 2.4GHz ISM
Maximum Power: < 20dBm (e.i.r.p.) （EU）
2.4GHz Protocol: ANT
Distance: >1000m（Air distance without interference）
Channel Resolution: 4096
Battery: 1.5AA*4 / 2S Lipo（JST）
Charging Interface: NO
Data Output: PWM/PPM/i-BUS/S.BUS
Low Voltage Warning: AA battery: <4.2V/ Lipo battery: <7.2V
Antenna Type: Built-in double antennas
Display: 128*64 LCD (Black and white Dot Matrix Screen)
Temperature Range: -10℃ ~ +60℃
Humidity Range: 20% ~ 95%
Languages: Chinese, English
Online Update: Yes
Color: Black
Size: 176*210.9*82.5mm
Weight: 420g
Receiver: 

Product Model: FS-SR8
Adaptive Transmitter: FS-ST8 (Adapts Transmitter with ANT Protocol )
Adaptive Models: Helicopters, Gliders, Delta-wing airplanes, Multicopters, Engineering Vehicles, Robots, Cars or Boats, etc.
Numbers of Channel: 8
Maximum Power: < 20dBm (e.i.r.p.) （EU）
RF: 2.4GHz ISM
2.4GHz Protocol: ANT
Distance: >1000m (Air Distance without Interference）
Antenna Type: Two Antennas
Input Power: 3.5~9V/DC
Data Output: PWM/PPM/i-BUS/S.BUS
Online Update: Yes
Temperature Range: -10℃ ~ +60℃
Humidity Range: 20% ~ 95%
Size: 44.8*26.6*11.3mm
Package Includes:
1 x FlySky FS-ST8 2.4 GHz ANT Transmitter

1 x FS-SR8 receiver

FlySky FS-ST8 2.4 GHz ANT Transmitter with FS-SR8 receiver (Upgraded Version)

Bandwidth (KHz): 500.
RF Range (GHz): 2.40 ~ 2.48.
No. of channels: 6.
Remote controller weight (gm): 400.
Power: 6V (1.5V AA*4).
Antenna Length: 26mm * 2 (dual antenna).
Transmitting Power: ≤ 20dBm.
RF Receiver Sensitivity: -105dbm.

FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver

FLYSKY

Build in high efficiency antenna to avoid delay in digital transmission. For safety flying
Build in intelligent communication. Increase the stability of long distance transmission. Dual antenna dual module
Supported by FHSS technology. The longer distance can reach 20km
Hall sensor gimbal with permanent magnetic sensor make longer life to 30 years. Military grade anti dust protective gimbal cover
Remote dimming camera with &w LED can capture video clearly at night
Bluetooth plus USB wire provide reliable link up
24hrs continues working with one charge
Legal 100mw output power comply with related certificate for export

Skydroid T12 2.4GHz 12CH Integrated Control Video and Telemtry System 20km Range Transmitter with R12 Receiver and Camera for RC Drone

Specifications:
Brand: Skydroid
Item name: T12 Transmitter
Number of channels: 12 channels
Frequency: 2.400-2.4833GHz
Working voltage: 3.7V(1s Li-ion)
Working Current: 130mA
Modulation: New FHSS
Weight: 560g
Firmware: APP online
Dimension: 225*123*35mm
Duration: 25 hours
Battery Capacitor: 4000mA
Charge Port: MICRO-USB
Application: Helicopter,Fixed wing,Quadcopter,car boat

Package Included:
1 x T12 Transmitter
1 x R12 Receiver
1 x Camera


Skydroid T12 2.4GHz 12CH Remote Control

This Remote control System comes with FrSky R9M 2019 Module which offers 4 switchable RF power outputs so you can choose the appropriate power for different flight situations.
No. of Channels:16 (ACCST D16) / 24 (ACCESS) channels
Internal RF module: ISRM-N
Operating Voltage (VDC):6.5 ~ 8.4
Current Consumption (mA):160mA@7.2V
Operating Temperature Range (°C):-10 to 55
Display Resolution:128 x 64
Open-source operating system
Installed with ACCESS protocol
High-speed module digital interface
Supports spectrum analyzer function
Supports wired training function
Quad Ball Bearing Gimbals
Audio Speech Outputs (values, alarms, settings, etc.)
Real-time Flight Data Logging
Receiver Signal Strength Indicator (RSSI) Alerts
Super Low Latency
Vibration Alerts
Model files are compatible with TARANIS X9D/X9D Plus/X9E.

Package Included:
1 x FrSky 2.4GHz Taranis Q X7 Access Transmitter (White)
1 x FrSky R9M 2019 Module
1 x R9MX Receiver
1 x  Neck Strap and  Neck Strap Adapter
1 x USB type A to Mini USB Cable (50 cm)
1 x User Manual (English)

FrSky 2.4GHz Taranis Q X7 Access Transmitter (White) with R9M 2019 Module and R9MX Receiver

eatures

RadioMaster TX12 16ch OpenTX Multi-Module Compatible Digital Proportional Radio System Transmitter for RC Drone.

Description:

Brand Name: RadioMaster
Item Name:TX12 Transmitter
Size:170*159*108mm
Weight: 363g
Frequency: 2.400GHZ-2.480GHZ
RF Chip: Single-chip Multi-protocol（CC2500）
Supported Protocols: Corona, Hitec, Futaba S-FHSS,Frsky D16/D8, RadioLink, Graupner HoTT
Transmitting Power: 20dbm
Antenna Gain: 2db
Working Current: 160mA@8.4V
Voltage Range:6.6-8.4v DC
Range: > 2km @ 20dbm (depending on receiver)
Radio Firmware: OpenTX（Transmitter）/ Multi-Module（RF module)
Channels: Up to 16 (depending on receiver)
Display:128*64 Monochrome LCD display
Gimbal: High precision potentiometer gimbals
External Module:JR/FrSKY/Crossfire compatible
Upgrade Method: USB/SD card* & OpenTX Companion PC software
* SD Card not included. *

RadioMaster TX12 Multi-Protocol OpenTX 2.4GHz RC Transmitter