home

HOME

composite-material

COMPOSITE MATERIAL

downloads

DOWNLOADS

about-us

ABOUT US

contact-us

CONTACT US

certifications

CERTIFICATIONS

gst-itc

GST ITC

payment-options

PAYMENT OPTIONS

return-exchange

RETURN & EXCHANGE

terms-of-service

TERMS OF SERVICE

privacy-policy

PRIVACY POLICY

shipping-policy

SHIPPING POLICY

general

GENERAL

all-products

All Products

drone-kit

Drone Kit

fpv-kit

FPV KIT

drone-motors-bldc

Drone Motors (BLDC)

t-motor

T-MOTOR

emax

EMAX

betafpv

BETAFPV

hglrc

HGLRC

tarot

Tarot

drone-transmitter-and-receiver

Drone Transmitter and Receiver

flysky

Flysky

radiomaster

Radiomaster

frysky

Frysky

radiolink

Radiolink

siyi

SIYI

jumper

Jumper

drone-frame-and-accessories

Drone Frame and Accessories

quadcopter

Quadcopter

hexacopter

Hexacopter

octacopter

Octacopter

flight-controller-accessories

Flight Controller & Accessories

raspberry-pi-accessories

Raspberry Pi & Accessories

gimbal-accessories

Gimbal Accessories

telemetry

Telemetry

gps-and-antennas

GPS and Antennas

simulators

Simulators

connectors

Connectors

arduino-boards

Arduino Boards

3d-printing-filament

3D Printing Filament

electronic-instruments-and-tools

Electronic Instruments and Tools

soldering-tools

Soldering Tools

smart-gadgets

Smart Gadgets

servo-motors

Servo Motors

robotics-accessories

Robotics Accessories

batteries

Batteries

sensors

Sensors

wires-and-cables

Wires and Cables

esc-drone-speed-controller

(ESC) Drone Speed Controller

fpv-esc

FPV ESC

tapes-and-adhesive

Tapes and Adhesive

red-acrylic-polyester-tape

Red Acrylic Polyester Tape

duct-tape

Duct Tape

cross-filament-tape

Cross Filament Tape

masking-tape

Masking Tape

printed-tape

Printed Tape

miscellaneous

Miscellaneous

camera

Camera

propellers

Propellers

0-3-inch

0-3 Inch

9-15

16-22

battery-chargers

Battery Chargers

heat-shrink-tubing-sleeve

Heat Shrink Tubing / Sleeve

pvc-heat-shrink

PVC Heat Shrink

1-mm-to-4-mm

1 mm to 4 mm

5-mm-to-10-mm

5 mm to 10 mm

heat-shrink-combos

Heat Shrink Combos

carbon-fiber-product

Carbon Fiber Product

carbon-fiber-sheet

Carbon Fiber Sheet

carbon-fiber-tube

Carbon Fiber Tube

balsa-sheets

Balsa Sheets

fixed-wing-parts

Fixed Wing Parts

motor-spinner

Motor Spinner

servo-motors-1

video-transmitter-receiver

Video Transmitter & Receiver

fpv-goggles

FPV Goggles

screws-and-nuts

Screws and Nuts

drone-accessories

Drone Accessories

Footer

Terms & Conditions
Please read these Terms and Conditions ("Terms", "Terms and Conditions") carefully before using our webstore operated by our company/entity. ("us", "we", or "our"), or the services provided therein (the “Service”).  These Terms apply to all visitors, users and others who access or use the Service. 
Your access to and use of the Service is conditional upon on your acceptance of and compliance with these Terms.  By accessing or using the Service you agree to be bound by these Terms. If you disagree with any part of the terms, do not access or use the Service. 
We reserve the right to revise these Terms from time to time. Please check these Terms from time to time for any amendments. Your continued use of the Service after these Terms have been amended will be deemed to constitute your acceptance of the amended Terms.


Placing an Order
To place an order through our webstore, click on the product that you wish to purchase and follow the onscreen instructions. Your purchase of the product shall be subject to the terms and conditions contained in our webstore in relation to the product.    
You should take care to ensure that all the information you provide to us is correct. Please check your Order before submitting it to us. If you are placing an Order for a product which is digital content, you must check that the specifications of your computer or device meet the hardware and software requirements.
After you have placed an Order, we will send an email to you acknowledging that we have received your Order. This acknowledgement does not, however, mean that your Order has been accepted by us.
We are not obliged to accept your Order and may at our discretion decline to accept any Order. In the event we decline to accept an Order, we may send an email to you notifying you that we do not accept your Order. This is typically for the following reasons:
a.	the product is not available;
b.	we cannot authorise your payment;
c.	you are not allowed to purchase the Product from us under the applicable law;
d.	we are not allowed to sell the Product to you under the applicable law; or
e.	there has been an error in the pricing or description of the product.


When we accept your Order, we will confirm such acceptance by sending an email to you confirming that we have received your Order and will be preparing to ship the product to your address or, in the case of Products which are digital content, providing you with instructions on how the digital content can be downloaded (“Confirmation Email”). A binding contract in respect of the product ordered will be formed between you and us when the Confirmation Email is sent to you.


Cancellation & Refund
If you change your mind, or the product you received is not what you expected or are otherwise not satisfied with our product, please contact us before returning the item. 
You have [fourteen days] to return an order after receiving it.
If the product or packaging is used or damaged, we reserve the right to deduct any depreciation in value when refunding the product. 
Unless otherwise agreed upon, the refund will be processed through the same payment method you used to make your original purchase.


Shipping & Delivery
Products in stock are normally delivered within the number of working days shown on our website.
We will deliver the Products to the address given in your Order. If no one is at the address at the time of delivery, we will inform you of an alternative time for the delivery or a location where you can collect the Products.
Unless arrangements are made with us, you must cover the cost of the return. We reserve the right to not allow for returns or exchanges to our products. 
Please note that exceptions may apply for the return of certain custom-made, hygienic and other products
You are responsible for any damage incurred by items during the return shipment. We therefore strongly recommend that you send the products well packaged, in good condition and in their original box and/or packaging.
If possible, please provide us with a tracking number for the return shipment.
If a returned item is shipped internationally, mark as “RETURNED GOODS” to avoid any Customs charges. We are not responsible for any charges imposed on packages returned by Customs.
If you have any questions, please contact us.


Disclaimer
The information contained on our webstore is for general information purposes only. We assume no responsibility for errors or omissions in the contents of our webstore or in the course of providing the Service. In no event shall our company be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of our products, our webstore or the Service. 
We reserve the right to make additions, deletions, or modification to the contents on the webstore at any time without prior notice. We do not warrant that the webstore is free of viruses or other harmful components. 
You agree that we do not make any representations or warranties of any kind (implied, express or statutory) including warranties as to merchantability, satisfactory quality or fitness for a particular purpose, in respect of our products and/or the Service.  In addition, we do not make any representations or warranties that any digital content which we supply to you is (i) compatible with any third party software or equipment; or (ii) free of errors or bugs.


Privacy
The security of your Personal Information is important to us, but remember that no method of transmission over the Internet, or method of electronic storage, is 100% secure. While we strive to use commercially acceptable means to protect your Personal Information, we cannot guarantee its absolute security. 
We may use your Personal Information to contact you with newsletters, marketing or promotional materials.


Governing Law and Jurisdiction
These Terms shall be governed by and construed in accordance with the laws of the country which we have our primary place of business in. All disputes arising out of or in connection with these Terms shall be submitted to the exclusive jurisdiction of the Courts of the said country.


Header

This Website is Owned and Operated By - R P SONS DIGITAL ENTERPRISES

No. of Channels: 10
Model Type: Fixed-Wing/Glider/Helicopter
RF Range: 2.4055-2.475GHz
RF Channel: 140
RF Receiver Sensitivity: -105dBm
Bandwidth: 500KHz
2.4GHz System: AFHDS 2A
Modulation Type: GFSK
Oprating Voltage: 4.0-6.5V DC

FlySky FS-IA10B Radio Receiver

Operating Voltage (VDC):12
No. of Channels:6
Antenna Length (mm):26
Certificate: CE
Code Type:Digital
Color:Black
DSC Port:No
Default Operating Mode:Mode 2 (Left-Hand Throttle)
Cable Length:1 Mtr.

FS-SM600 6CH USB Powered Drone Simulator


Brand	Loctite
Compatible Material	Plastic
Colour	Clear
Item Package Quantity	1
Package Information	Tube

LOCTITE® 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be use on difficult-to-bond plastics.

 

Bonds plastics and EPDM
Wicking viscosity for tight bond lines
Makes O-rings instantly
 

Features and benefits

 

Perfect for all quick repairs involving plastic and rubber substrates
Primers like LOCTITE 770 or LOCTITE 7239 improve adhesion of difficult to bond substrates

Loctite 406 Surface Insensitive 20 Gm Heavy Duty Super Gel, Pack of 1

Supported Multi-Rotor: Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6.
Supported ESC Output: 400Hz refresh frequency.
Recommended Transmitter: PCM or 2.4GHz with minimum 4 channels.
Power Consumption: MAX1. 5W (0.3A@5V) Normal:0.6W (0.12A@5V).
Weight: MC:25g; VU:20g; GPS:21.3g.
All-in-One Design.
Advanced attitude stabilized Algorithm.
Multiple flight control mode/intelligent switching.
GPS Module Available/Accurate Position hold.
Intelligent Orientation Control (IOC).
Failsafe mode.

DJI NAZA-M Lite V1.1 with GPS Kit

SHANGYI 11.1V 2200mAh 3S 30C
Capacity: 2200mAh
Size: 24*34*108mm
Discharge Rate: 30C
Burst Rate :50C
XT60 Plug
Weight:183g

Safety Precautions :
Avoid over-charging or over-discharging the batteries.
Do n0t put it beside the high-temperature condition.
Don?t throw it into the fire or Water
Features :
Product?Type:?Lithium Polymer?Battery Pack
The Orange LiPo battery has matched resistance.
Good Temperature Control.
Minimum weight in Class


Shang Yi 2200mAh, 3S, 30C

Capacity (mAh)	
3300

Output Voltage (VDC)	
11.1

Discharge Plug	
XT-60

Balance Plug	
JST-XH

Standard Charge Current	
3.3 A(1.0C)

Maximum Charge Current	
13.2 A(4C)

Charging Voltage	
12.6V

Standard Discharge Current	
3.3 A(1.0C)

Burst Discharge Current	
82.5 A(25C)

Discharge Cut-off Voltage	
9.0 V

Configuration	
3S 1P

Impedance at 1khz	
≤ 35 mΩ

Length (mm)	
140

Width (mm)	
43

Height (mm)	
20

Weight (gm)	
260

Shipment Weight	
0.08 kg

Shipment Dimensions	
17 × 6 × 4 cm

Shang Yi 3300mAh, 3S, 30C

Voltage: 11.1
Max Continuous Discharge: 25C
Balance Plug: JST-XH
Discharge Plug: XT-60
Dimensions: 16x45x106(mm )
Weight: 180 gm

Lipo Battery 3s 4200 Mah

Manufacturer Rated Capacity: 4200mAh
Manufacturer Rated Standard Discharge Capacity: 4200mAh (Minimum)
Manufacturer Rated Max Discharge Current: 35A
Nominal Voltage: 3.6V
Peak Voltage: 4.2V
Cost-Effective
High power density
Easy maintenance

A lithium-ion battery or Li-ion battery is a type of rechargeable battery composed of cells in which lithium ions move from the negative electrode through an electrolyte to the positive electrode during discharge and back when charging, Li-ion batteries are able to be recharged hundreds of times and are more stable, They tend to have a higher energy density, voltage capacity and lower self-discharge rate than other rechargeable batteries, This makes for better power efficiency as a single cell has longer charge retention than other battery types Use a two to three year life expectancy for batteries that do not run through complete charge cycles. Rechargeable Lithium-Ion batteries have a limited life and will gradually lose their capacity to hold a charge. This loss of capacity (aging) is irreversible, The minimum lifespan most manufacturers expect from lithium-ion batteries is around 5 years or at least 2,000 charging cycles. But, if well cared for and used in proper conditions, lithium-ion batteries can last as long as 3,000 cycles.

Features:
Cost-Effective
High power density
Easy maintenance
Continuous voltage
Variety of models available
Protected: NO
Style: Flat Top
Color: Gray
Origin: Taiwan
Higher Battery Life
Do not use in higher temperatures
Specifications:
Size: 21700
Approximate Diameter: 18.6 mm (Max)
Approximate Length: 65.2 mm (Max)
Brand: E-One Moli Energy Corp. (Molicel) & New Power Energy (NPE)
Manufacturer Rated Capacity: 4200mAh
Manufacturer Rated Standard Discharge Capacity: 4200mAh (Minimum)
Manufacturer Rated Max Discharge Current: 35A
Nominal Voltage: 3.6V
Peak Voltage: 4.2V
Packages Includes:
1 x Molicel INR21700 P42A 4200mAh (11c) Lithium-Ion Battery

Molicel INR21700 P42A 4200mAh (11c) Lithium-Ion Battery

Best Grade Raw Material: Stick easily to bed,strong layer adhesion and compatible with all open source 3D printers.
Excellent Properties: Warp resistance and reduced shrinkage make this an ideal material for long hours 3D printing.
Precise Diameter: 1.75 mm controlled diametric consistency (Dimensional Accuracy +/- 0.05 mm of diameter).
﻿Correctly Measured Weight: Filament Net weight 1 KG(Excluding spool and packaging) & Gross Weight 1.3 KG.
Hassle Free 3D Printing: Your delightful material experience with zero complaint is our prime objective.
Professional & Safe Vaccum Packaging: Intact Vacuumed Sealed with Desiccant and Box Packed Untill You Open For Ensuring Moisture Proofing.
Always User Friendly: Recommended Extrusion/Nozzle Temperature 190°C - 230°C and Heated Bed 50°C - 60°C.
Success Over Period: Proven successfully in wide range of product applications.
Post Purchase Customer Support: Never going to disappoint with our feedback driven attitude.
In Stock Availability: Calculated Inventory system ensure you get what needed every time.
Fast Delivery: Our immediate PAN India shipping policy with wide range of courier options & auto generated tracking sharing on contact details improves customer trust on us.

PLA BLACK SPOOL 1.75MM DIA 

Heavy Duty Tape.
Reinforcement Tape.
Non-Tearable Tape.
Packing heavy material.
Thickness – 160 Micron
Cross Filament tapes are used for Heavy Material Packaging.
Made with Fibreglass yarn, Polyester film support and heavy Adhesive materials,
Applied for Palletizing, shipping long tubes and iron bars.
Made In India.

Cross Filament Tape – 96mm / 04″ Width – 45 Meters in Length

Overview
The Pixhawk® 6C is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connector Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk® 6C, you can find an STMicroelectronics® based STM32H743, paired with sensor technology from Bosch® & InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.

The Pixhawk® 6C's H7 microcontroller contain the Arm® Cortex®-M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models. The FMUv6C open standard includes high-performance, low-noise IMUs on board, designed to be cost effective while having IMU redundancy. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. The Pixhawk® 6C is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application.
This is the version with Aluminum CNC case. Another option we offer has case with plastic finish can be purchased here. 

Key Design Points
High performance H7 Processor with clock speed up to 480 MHz
New cost-effective design with low-profile form factor
Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
Newly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
Items Included-
Pixhawk 6C Flight Controller (Plastic Case)
PM02 V3 12S Power Module / PM07 12S Power Module
Cable Set
M8N GPS

Pixhawk 6C with M8N GPS

Fragile Tape (Handle with Care) – 48mm / 2″ Width
Printed messages on the tape communicate the need for careful handling.
Perfect fit for 48mm / 2 Inch tape gun Dispenser
Thickness – 42 Micron
Color – Milky Base
Printing – Red Color Print
Full Length as per description
Packing Cello Tape Ideal for packing Cartons (Boxes)
Pack your products with more reliability
For Domestic & Industrial Use.

Fragile Tape (Handle with Care) – 48mm / 2″ Width